Ntek TPM Pro

華新工程顧問有限公司-影像

Floor hammer machine

The new TPM-PRO Floor Hammer Machine is the result of a team of Italian technicians, specialized in the design and realization of measurement tools for acoustic impact calculations.
The strong and sturdy structure has been specially designed to ensure better transportability and make it one of the lightest on the market.
In 2018, TPM pro received type approval certification from the German Federal Metrology Office (PTB), the main German metrology institute recognized worldwide. The retractable feet ensure maximum comfort when positioning the TPM pro. Height calibration of the machine can be easily done without additional tools. The calibrator (provided by TPM pro) must be placed under three feet to verify the correct height of the machine. Proper alignment is achieved by tightening and/or loosening the rubber anti-vibration bearings and then securing them by tightening the locking ring onto the base.
The lithium battery has an operating capacity of 3 hours. The wireless remote control allows the user to switch the machine on and off remotely: the transmission light is up to 80 meters in open areas.

Standard Equipment

  • Wireless standard 433 MHz remote control
  • Antenna
  • Lithium battery
  • Power supply cable 220V
  • 73 mm Calibrator

Optional:

  • Soft carrying bag with shoulder strap
  • New HP 866 MHz Remote Control

Comply with the law

UNI EN ISO: 10140-3, ISO 140-7, ISO 16283-2, ASTM E492, ASTM E1007. According to CE directive

Technical features

  • Dimensions: 160 x 290 x 520 mm
  • Weight: 11 kg with batteries, antenna and remote control
  • Stand: 3 retractable pins, height adjustable
  • Power: 100÷¬240VAC, 50/60 Hz
  • Power consumption: 220VA
  • Antenna

Battery

  • Rechargeable lithium battery
  • Duration: 3 hours
  • Battery derating: every 900 discharge/charge cycles
  • 5% capacity loss
  • Battery charging time: 2 hours

Hammer

  • Five hammers
  • Wheelbase: 100±3 mm
  • Weight: 500±6g
  • Diameter: 30±0.2 mm
  • Front radius: 500 mm
  • Curve: ~500 mm
  • Tapping speed: 10 taps per second, speed controlled via encoder feedback loop
  • Order: 1, 3, 5, 2, 4
  • Effective descent height: 40 mm, adjustable ±5 mm

Remote control

  • Wireless: 433 MHz
  • Transmission line: 80m in open area